Littelfuse E5000 Accessories Series - Manual

Engine Control
© 2013 Littelfuse Protection Relays & Controls
Engine Diagnostics
Advanced
e5000 SerieS engineeye
Cylinder Pressure Analyzer
www.littelfuse.com/EngineEye
E5250 Crank Angle Band
Separate 2.98 m crank angle band
(Does not include crank angle sensor).
E5220 Break-out Box
Needed for connecting Crank Angle Sensor.
Accessories
Ordering
number
deScriptiOn
E5000.1000 engineeye basic (E5000.0010 + E5100.0010)
E5000.3000
engineeye professional
(E5000.0030 + E5100.0010 + E5300.0010)
Ordering Information
2
1
u
AcceSSOrieS deScriptiOn pAge
E5100.0010
Separate Pressure Sensor
with 1.5 m armored cable
See above
E5300.0010
Crank Angle Package includes:
Crank Angle Sensor+
Crank Angle Band +
Junction Box + Extension Cable
See above
Description
The EngineEye is a reliable and robust tool for engine
diagnostics. The system consists of a handheld Cylinder
Pressure Analyzer for collection of measurements, a pressure
sensor and an optional crank angle sensor. It is available in two
versions–Basic (E5000.1000) and Professional (E5000.3000).
Handheld Diagnostic Unit
The collected data is shown on the handheld display and
can be saved and analyzed with the PC software. Operation
is intuitive and requires no training. The unit is menu-driven
and can be connected to a PC without the need for
additional software. The EngineEye is designed with
ease-of use in mind.
Pressure Sensor
The Piezo electric pressure sensor employs a unique
technology, which allows for safe, long-term pressure
readings. The sensor may be left measuring on the open
indicator valve for hours, allowing misfire analysis over
extended periods of time.
Includes 1.5 m armored cable
Crank Angle Sensor Package
The crank angle can be measured with a special crank angle
sensor-belt with high resolution. The unique patented design
is easy to cut and adapt and thus applicable for all shaft
diameters. The crank angle sensor belt
installation can easily be made by
ships’ crew themselves, reducing
installation costs.
Includes:
Crank Angle Sensor, Crank Angle Band,
Junction Box & Extension Cable
With the EngineEye, operators can:
g
Work safely due to insulated grip
g
Tune and balance the engine during operation
g
Work with intuitive software on large display—
even with gloves
g
Run the engine with optimal settings of the
operation parameters
g
Analyze software data (incl. TDC & ISO correction)
and e-mail readings to the head office
g
Easily install the advanced sensor-belt on all
shaft diameters
g
Expect reduced costs for maintenance
3
2
3
1
Rev: 4-A-050313