Littelfuse 155100 Series User Manual
In-line cartridge fuse holders
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
In-Line Cartridge Fuse Holders
Dimensions
WIRE: Red #16GPT Length 330±5mm (13")
47.5±1
(1.87±0.039")
10.67
(.42")
DIA.
Fuseholder Body
Conductor
Compression Spring
Fuseholder Cap
1.45mm
1.45mm
COMPRESSION SPRING:
15±0.2mm
Ø0.6±0.02mm
O.D. Ø5.1±0.1mm
I.D. Ø3.9±0.1mm
Compatible Fuses
2AG or 5×20mm
Electrical
This fuseholder, part number 150274, is
intended for use with 2AG and 5 × 20mm fuses.
Maximum current ratings are 5 amperes at 250V
for the 2AG size fuses and 10 amperes at 250V
for the 5 × 20mm size fuses.**
Body
Black Nylon, UL94 V-0
Terminals
Brass
Wire
16 Awg size; Nominal o.d. 0.104”; color Red
Lead Pull Test
Will withstand 10 lb. pull.
Ambient Temperature
–40ºC to +80ºC.
Product Characteristics
150 Series In-Line Holders for 2AG or 5×20mm Fuses
NOTES:
* Ensure that proper fuse de-rating is factored in fuseholder selection.
** If use above 32V, power must be turn off when changing the fuse.
Ordering Information
Ordering Number
packaging
01500274Z
Bulk Pack (100 Pcs)
Additional Information