Littelfuse 275 Series - Manual (Page 3)

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
Axial Lead & Cartridge Fuses
PICO ® > Very Fast-Acting > 275 Series
Materials
Transparent sleeve covered body,
Pure Tin-coated copper wire leads
Solderability MIL-STD-202, Method 208
Lead Pull Force
MIL-STD-202, Method 211, Test Condition
A (will withstand a 5lbs. axial pull test)
Product Characteristics
Operating Temperature –55ºC to +125ºC
Shock
MIL-STD-202, Method 213, Test
Condition I (100 G’s peak for 6
milliseconds) and per method 2028
(78G’s peak for 11 milliseconds)
Vibration
MIL-STD-202, Method 201 (10–55
Hz); Method 204, Test Condition D
(Vibrations of 10-2000 cps at 20 G’s)
Moisture Resistance MIL-STD-202, Method 106
3/4 A
Transparent
Insulating Sleeve
B B
A
C
DIA.
275 000 Series
Amperage
20 - 30
7.87
(.31")
27.78
(1.094")
3.38
(.133")
1.016
(.040")
D
B C A D
Dimensions in mm (inches)
Dimensions
Packaging
Part Numbering System
packaging Option packaging Specification
Quantity &
packaging Code
T1: 52.4mm (2.062") Tape and Reel EIA 296
Please refer to available quantities above in “Part
Numbering System”
0275 xxxx M R T1 L
Lead Length
T1 = 52.4mm (2.062”)
Blank = For Loose pack (MXL,VXL)
RoHS
Only RoHS parts are available for
275 Series
Type of Packaging
R = Reel
X = Loose Pack
Quantity
M = 1000
V = 5
Current Rating
Refer to Amp Code column of
Electrical Characteristics Table
Series
275
The default lead length for loose pack is T1.