Littelfuse FLEC Flexible Electrical Center - Manual

Flexible Electrical Center
1
www.littelfuse.com
©2009 Littelfuse
FLEC™ is a trademark of Littelfuse, Inc. All rights reserved.
FLEC™ Flexible Electrical Center
Specifications are subject to change without notice. Product Technical Datasheet
Specifications
Input Terminals: (3) M8 studs rated up to 100A each
Output Terminals: (38) 2.8mm blades (25A max each)
(38) 1.5mm blades (15A max each)
Operating Temperature: -40°C to 85°C
Termination: Uses industry standard Delphi GT Series terminals
& connectors (sealed)
Materials: UL94V-0 thermoplastic with RoHS-compliant PCB
High-temp silicone gasket
Spare components: (4) spare fuse positions located in cover
Fuse puller provided
Cover tether optional
Stud caps optional
Inside cover label optional
FLEC™ Flexible Electrical Center
The Flexible Electrical Center (FLEC™) is a configurable power distribution
module for the heavy transportation (OTB) market. It accommodates circuit
protection components in a compact footprint. Your electrical schematic is
programmed into the FLEC™ to create a simple “plug-and-play” system.
Accessories
Features and Benefits
PCB: Multi-layer board allows for custom circuit configurations
Cover: Twist-on cover for easy single-hand installation & removal
Base: Includes vent for pressure equalization
High component density: Accepts multiple footprints including MINI,
JCASE, PCB-mount, etc. in a compact package
Input Protection: MEGA fuse can be mounted across input studs to protect
multiple circuits in FLEC; Additional Flex-MEGA holder can be interlocked to
FLEC for added fuse protection
PCB-mount option: Components can be mounted directly to board for space
and cost savings (i.e. High power relays, resistors, diodes)
Preliminary - Subject to Change
Stud Insulating Cover
Tether for FLEC Main Cover