Littelfuse G2200 Series - Manual (Page 4)

G600 Voltage Relay
Over- and Undervoltage
8-36V DC/0.75W at 24V DC
63 to 690V AC ± 30%
35 to 75Hz
80 to 120% (max. 70 to 130%)
80 to 120% (max. 70 to 130%)
1 to 10sec.
(max. 1 to 360sec.)
380V AC, 5A, 1250VA
150V DC, 5A, 120W
ND (NE)
Non-latching
NE (ND)
Non-latching (latching)
Automatic
(manually by term. 11)
± 5%
± 1%
RJ11-modular
-20° to 70° C
EN50263
50 hours before final test
Polycarbonate. Flame retardant
0.3kg
73 x 75 x 114mm (HxWxD)
35 DIN rail or two 4mm
(3/16”) screws
Function
Supply
Input voltage
Frequency
Trip level
- 1st trip level
- 2nd trip level
Hysteresis
Delay
Relay rating
Phase monitor
Pick-up (phase) relay
- Normal state
- Latching
Trip relay
- Normal state
- Latching
Overvoltage relay
- Normal state
- Latching
Undervoltage relay
- Normal state
- Latching
Reset
Accuracy
Repeatability
Serial link
Operating temperature
EMC
Burn-in
Enclosure material
Weight
Dimensions
Installation
G00 Voltage Relay
3 Phase Overvoltage
(Undervoltage)
8-36V DC/0.75W at 24V DC
63 to 690V AC ± 30%
35 to 75Hz
100 to 120% (max. 1 to 130%)
1 to 10% (max. 1 to 50%)
1 to 10sec.
(max. 1 to 360sec.)
380V AC, 5A, 1250VA
150V DC, 5A, 120W
Phase failure, phase order & symmetry
ND (NE)
Non-latching
ND (NE)
Non-latching
Automatic
(manually by term. 11)
± 5%
± 1%
RJ11-modular
-20° to 70° C
EN50263
50 hours before final test
Polycarbonate. Flame retardant
0.5kg
73 x 75 x 114mm (HxWxD)
35 DIN rail or two 4mm
(3/16”) screws
Specifications
(Specifications in parentheses require setup by serial link)
The specifications are subject to change without notice.
G100 Voltage Relay
Overvoltage
(Undervoltage)
8-36V DC/0.75W at 24V DC
63 to 690V AC ± 30%
35 to 75Hz
100 to 120% (max. 70 to 130%)
1 to10% (max. 1 to 50%)
1 to 10sec.
(max. 1 to 360sec.)
380V AC, 5A, 1250VA
150V DC, 5A, 120W
ND (NE).
Non-latching
ND (NE)
Non-latching (latching)
Automatic
(manually by term. 11)
± 5%
± 1%
RJ11-modular
-20° to 70° C
EN50263
50 hours before final test
Polycarbonate. Flame retardant
0.3kg
73 x 75 x 114mm (HxWxD)
35 DIN rail or two 4mm
(3/16”) screws