Littelfuse Battrax Series MS-013 Singl Port Negative - Manual (Page 3)

SIDACtor ® Protection Thyristors
120
Revised: September 30, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
SLIC Protection
Part Numbering
B1 xx 1 U x L xx
Battrax Series Positive MS-013 Part Numbering.eps
For pg. 131
TYPE
HOLDING CURRENT
PACKAGE TYPE
I
PP
RATING
RoHS COMPLIANT
CONSTRUCTION VARIABLE
PACKING OPTIONS
RP: Reel Pack
TP: Tube Pack B1: Negative Battrax SIDACtor
10: 100 mA 16: 160 mA
20: 200 mA
Physical Specifications
Lead Material Copper Alloy
Terminal Finish 100% Matte-Tin Plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Time
Temper
at
ur
e
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
(t 25ºC to peak)
Ramp-down
Ramp-up
Preheat
Critical Zone
T
L
to T
P
Figure 1
Soldering Parameters
Environmental Specifications
Part Marking
High Temp Voltage
Blocking
80% Rated V
REF
Max. (V
DC
Peak ) +125°C or
+150°C, 504 or 1008 hrs. MIL-STD-750 (Method
1040) JEDEC, JESD22-A-101
Temp Cycling
-65°C to +150°C, 15 min. dwell, 10 up to 100
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
Biased Temp &
Humidity 52 V
DC
(+85°C) 85%RH, 504 up to 1008 hrs. EIA/
JEDEC, JESD22-A-101
High Temp Storage
+150°C 1008 hrs. MIL-STD-750 (Method 1031)
JEDEC, JESD22-A-101
Low Temp Storage -65°C, 1008 hrs.
Thermal Shock
0°C to +100°C, 5 min. dwell, 10 sec. transfer,
10 cycles. MIL-STD-750 (Method 1056) JEDEC,
JESD22-A-106
Autoclave (Pressure
Cooker Test) +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/
JEDEC, JESD22-A-102
Resistance to Solder
Heat
+260°C, 30 secs. MIL-STD-750 (Method 2031)
Moisture Sensitivity
Level 85%RH, +85°C, 168 hrs., 3 reflow cycles
(+260°C Peak). JEDEC-J-STD-020, Level 1
Reflow Condition
Pb-Free assembly
(see Fig. 1)
Pre Heat
- Temperature Min (T
s(min)
) +150°C
- Temperature Max (T
s(max)
) +200°C
- Time (Min to Max) (t
s
) 60-180 secs.
Average ramp up rate (Liquidus Temp (T
L
)
to peak)
3°C/sec. Max.
T
S(max)
to T
L
- Ramp-up Rate 3°C/sec. Max.
Reflow
- Temperature (T
L
) (Liquidus) +217°C
- Temperature (t
L
) 60-150 secs.
Peak Temp (T
P
) +260(+0/-5)°C
Time within 5°C of actual Peak Temp (t
p
) 30 secs. Max.
Ramp-down Rate 6°C/sec. Max.
Time 25°C to Peak Temp (T
P
) 8 min. Max.
Do not exceed +260°C
XXXXXXX
XXXXX
Part Marking Code
(Refer to Electrical Characteristics Table)
Date Code
MS-013 Part Marking Drawing_2009-03-05.eps