Littelfuse MLA Varistor Series - Manual (Page 8)

© 2013 Littelfuse, Inc. 46
Revised: December 16, 2013
Varistor Products
MLA Varistor Series
Surface Mount Multilayer Varistors (MLVs) > MLA Series
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/ML.html or MLA.html for current information.
Tape and Reel Specifications
Symbol Description
Dimensions in Millimeters
0402 Size 0603, 0805, 1206 & 1210 Sizes
A
0
Width of Cavity Dependent on Chip Size to Minimize Rotation.
B
0
Length of Cavity Dependent on Chip Size to Minimize Rotation.
K
0
Depth of Cavity Dependent on Chip Size to Minimize Rotation.
W Width of Tape 8 -/+0.2 8 -/+0.3
F Distance Between Drive Hole Centers and Cavity Centers 3.5 -/+0.05 3.5 -/+0.05
E Distance Between Drive Hole Centers and Tape Edge 1.75 -/+0.1 1.75 -/+0.1
P
1
Distance Between Cavity Centers 2-/+0.05 4 -/+0.1
P
2
Axial Drive Distance Between Drive Hole Centers & Cavity Centers 2 -/+0.1 2 -/+0.1
P
0
Axial Drive Distance Between Drive Hole Centers 4 -/+0.1 4 -/+0.1
D
0
Drive Hole Diameter 1.55 -/+0.05 1.55 -/+0.05
D
1
Diameter of Cavity Piercing N/A 1.05 -/+0.05
T
1
Top Tape Thickness 0.1 Max 0.1 Max
NOTES:
• Conforms to EIA-481-1, Revision A
• Can be supplied to IEC publication 286-3
K 0
t
1
D 0 P 0
D
1
P
1
A
0
P
2
B 0
F
E
W
For T and H Pack Options: PLASTIC CARRIER TAPE
For R Pack Options: EMBOSSED PAPER CARRIER TAPE
EMBOSSMENT
TOP TAPE 8mm
NOMINAL
PRODUCT
IDENTIFYING
LABEL
178mm
OR 330mm
DIA. REEL