En g li sh, Faucet installation – Factory Direct Hardware Pfister F-034-4AL Brookwood User Manual

Page 2

ENGLISH

FAUCET INSTALLATION

Thank you for purchasing this Price Pfister product. All Price Pfister products are carefully engineered, and factory tested to

provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow

illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Price Pfister

recommends calling a professional if you are uncertain about installing this product!

This product should be installed in accordance with all local and state plumbing and

building codes.

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are usually found

under the sink or near the water meter. If you are replacing an existing faucet, remove

the old faucet from the sink and clean the sink surface thoroughly.

3 TOOLS RECOMMENDED

• Plumber's putty

• Slotted screwdriver

• Philips head screwdriver

• Pliers

• Adjustable wrench

• Flashlight

• Cloth

Your installation may require new supply lines and / or shut-off valves or other additional

tools.

6 THREE HOLE FAUCET INSTALLATION

Following manufacturer’s recommendations on use, apply plumber’s putty into putty

groove in Deck Plate (6A). Insert Hose Guide (6D) into the Side Hole (6E) in the Deck

Plate (6A). Align the hose guide Tabs to those in the Deck Plate Hole. Insert the faucet

Supply Tubes (6B) through the center hole of the sink. Insert faucet Shank (6C) and

Hose Guide (6D) through the end holes of the sink.

Deck Plate (6A) can be placed with Hose Guide (6D) in either the left or right side (see step 10

for Deck Plate removal).

4 HANDLE ATTACHMENT

Place Lever Handle (4A) onto Valve Stem (4B) and secure with Fastener (4C) as shown.

Insert Decorative Button (4D) onto Lever Handle (4A).

Models

34-3AL

For 3 Hole Installation

With Side Spray

Go To Step 6

Models

34-4AL

For 4 Hole Installation

With Side Spray

Models

34-4ALS 34-4ALY

For 2 Hole Installation

With Side Spray

Go To Step 8

Go To Step 10

These instructions cover three

different installations

FORWARD