Factory Direct Hardware Delta 9159T-DST Trinsic - Manual

COMPLIES WITH:
•
ASME A112.18.1 / CSA B125.1
• ASME A112.18.6
Indicates compliance to
ICC/ANSI A117.1
• Verified compliant with .25% weighted
average Pb content regulations.
KITCHEN
FAUCETS
■ Trinsic ™ Collection
■ Single Handle Deck Mount
■ 2-Function Pull-Down Sprayer
■ Single or 3 Hole Sink Applications
■ Centermount or 8" (203 mm) Centers w/
Optional 10 1/2 (267 mm) Escutcheon
■ MagnaTite™ Magnetic Docking
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• Single handle, 2-function pull-down kitchen faucets for
exposed mounting on single or three hole sinks.
• Touch2O® on/off functionality.
• On-off indicator light also signals when batteries run low.
• 15 11/16" (399 mm) high, 9 1/2" (241 mm) long, spout
swings 360˚.
• Lever handle. Control mechanism shall be full-motion
valve cartridge.
• Touch-Clean® sprayhead.
• Quick connect hoses.
• Pull-down wand operates in an aerated or spray mode
via ergonomic buttons.
• MagnaTite™ magnetic docking.
• Dual integral check valves in sprayer.
• Mounting wrench to assist in tightening mounting
nut securely.
• Hose travels inside mounting shank so it will not interfere
with deck edges.
• Flow rate 2.2 gpm max.
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
9159T-DST ▲
®
®
U P
C
36 5/8"
(930 mm)
35 9/64"
(893 mm)
9 1/2"
(241 mm)
15 11/16"
(399 mm)
8 7/16"
(214 mm)
4 3/8"
(111 mm)
With Optional
Escutcheon RP64070 ▲
2 13/32"
(61 mm)
9959T-DST ▲
DSP-K-9159T-DST Rev. B
9959T-DST
9159T-DST
▲ Designate proper finish suffix
Min. 2 1/2" (64 mm)
Clearance To Back Splash
3X 1 1/4"
to 1 1/2"
(32 mm to
38 mm)
Hole Size
55 E 111th Street, Indianapolis, Indiana 46280
395 Matheson Blvd. E., Mississauga, ON L4Z 2H2
© 2010 Masco Corporation of Indiana
WARRANTy
• Lifetime Faucet and Finish Limited Warranty
to the original consumer purchaser to be free
from defects in material and workmanship.
• 5 Year Limited Warranty for usage in all industrial,
commercial and business applications.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.specselect.com for finish options and product availability.
10 1/2"
(267 mm)
8" (203 mm)
Centers
9 5/16"
(237 mm)
2 1/2"
(64 mm)
36 5/8"
(930 mm)
35 9/64"
(893 mm)
6 1/2"
(165 mm)
13"
(330 mm)
7"
(178 mm)
4 3/8"
(111 mm)
2 13/32"
(61 mm)
Min. 2 1/2" (64 mm)
Clearance To Back Splash
3X 1 1/4"
to 1 1/2"
(32 mm to
38 mm)
Hole Size
10 1/2"
(267 mm)
8" (203 mm)
Centers
9 5/16"
(237 mm)
2 1/2"
(64 mm)
3/8"
Compression
Fitting
3/8"
Compression
Fitting
2 1/4" (57 mm)
Max. w/ 10 1/2"
Escutcheon
2 1/2" (64 mm)
Max. w/o 10 1/2"
Escutchen
2 1/4" (57 mm)
Max. w/ 10 1/2"
Escutcheon
2 1/2" (64 mm)
Max. w/o 10 1/2"
Escutchen