dbx DriveRack 4820 - Manual (Page 71)

Driverack ® 4800/4820 user Manual
6.18 - notch filter Insert
The 4800 and 4820 units offer 6-Band Notch Filter that can be inserted in the Input section. The Notch
filter is designed to provide a significant amount of cut in very narrow frequency bandwidths to remove
room resonances and other unwanted artifacts.
notch on/off switch
This turns the Notch filter on and off.
flat/restore switch
These buttons either flatten all bands (Flat) or restore (Restore) all bands to their previous settings.
filter Select switch
This selects the Parametric EQ filter to be adjusted.
filter on/off switch
This turns the Selected (1-9) parametric EQ on and off.
frequency (fc) fader
This sets the frequency of the selected Notch Filter, and is adjustable between 20Hz to 20kHz.
Gain fader
This sets the amount of boost or cut of the selected Notch Filter, and is adjustable between +6 and -36 dB.
Q fader
This sets the Q (or bandwidth) of the selected Notch Filter and is adjustable between 16 to 128.
Detailed Parameters
Section 6
61
DriveRack
®