beautypg.com

Important safety instructions – dbx DriveRack 4820 User Manual

Page 2

background image

WARNING FOR YOUR PROTECTION READ THESE INSTRUCTIONS:

KEEP THESE INSTRUCTIONS

HEED ALL WARNINGS

FOLLOW ALL INSTRUCTIONS

THE APPARATUS SHALL NOT bE ExPOSED TO DRIPPING OR SPLASHING LIqUID

AND NO ObjECT FILLED WITH LIqUID, SUCH AS vASES, SHALL bE PLACED ON

THE APPARATUS.

CLEAN ONLY WITH A DRY CLOTH.

DO NOT bLOCK ANY OF THE vENTILATION OPENINGS. INSTALL IN ACCORDANCE

WITH THE MANUFACTURER’S INSTRUCTIONS.

DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT

REGISTERS, STOvES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT

PRODUCE HEAT.

ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED bY THE MANUFACTURER.

UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED

FOR LONG PERIODS OF TIME.

Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade or third prong are provided for your safety. If the provided

plug does not fit your outlet, consult an electrician for replacement of

the obsolete outlet.

Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from

the apparatus.

Use only with the cart stand, tripod bracket, or table specified by the

manufacture, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over

Refer all servicing to to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain

or moisture, does not operate normally, or has been dropped.

POWER ON/OFF SWITCH: For products provided with a power switch, the

power switch DOES NOT break the connection from the mains.

MAINS DISCONNECT: The plug shall remain readily operable. For rack-

mount or installation where plug is not accessible, an all-pole mains

switch with a contact separation of at least 3 mm in each pole shall

be incorporated into the electrical installation of the rack or building.

FOR UNITS EqUIPPED WITH ExTERNALLY ACCESSIbLE FUSE RECEPTACLE:

Replace fuse with same type and rating only.

MULTIPLE-INPUT vOLTAGE: This equipment may require the use of a dif-

ferent line cord, attachment plug, or both, depending on the available

power source at installation. Connect this equipment only to the power

source indicated on the equipment rear panel. To reduce the risk of

fire or electric shock, refer servicing to qualified service personnel

or equivalent.

This Equipment is intended for rack mount use only.

If connected to 240v supply, a suitable CSA/UL certified power cord shall

be used for this supply.

Safety InStructIonS

Notice For customers iF Your uNit is equipped

With A poWer cord.

WArNiNG: this AppLiANce must Be eArthed.

coNNect oNLY to A mAiNs socket outLet With

protective eArthiNG coNNectioN.

the cores in the mains lead are coloured in accordance with

the following code:

GreeN and YeLLoW - earth BLue - Neutral BroWN - Live

As colours of the cores in the mains lead of this appliance may

not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

• The core which is coloured green and yellow must be con-

nected to the terminal in the plug marked with the letter e, or

with the earth symbol, or coloured green, or green and yellow.

• The core which is coloured blue must be connected to the

terminal marked N or coloured black.

• The core which is coloured brown must be connected to the

terminal marked L or coloured red.

this equipment may require the use of a different line cord,

attachment plug, or both, depending on the available power

source at installation. If the attachment plug needs to be

changed, refer servicing to qualified service personnel who

should refer to the table below. The green/yellow wire shall

be connected directly to the units chassis.

LIVE

E

NEUTRAL

EARTH GND

CONDUCTOR

L

N

BROWN

BLUE

GREEN/YEL

BLACK

Normal

Alt

WIRE COLOR

WHITE

GREEN

WArNiNG: if the ground is defeated, certain fault conditions

in the unit or in the system to which it is connected can result

in full line voltage between chassis and earth ground. Severe

injury or death can then result if the chassis and earth ground

are touched simultaneously.

C A U T I O N

ATTENTION:

RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The symbols shown above are internationally

accepted symbols that warn of potential hazards

with electrical products. the lightning flash with

arrowpoint in an equilateral triangle means that

there are dangerous voltages present within the

unit. the exclamation point in an equilateral tri-

angle indicates that it is necessary for the user to

refer to the owner’s manual.

These symbols warn that there are no user service-

able parts inside the unit. Do not open the unit.

do not attempt to service the unit yourself. refer

all servicing to qualified personnel. opening the

chassis for any reason will void the manufacturer’s

warranty. do not get the unit wet. if liquid is

spilled on the unit, shut it off immediately and take

it to a dealer for service. disconnect the unit dur-

ing storms to prevent damage.

IMPortant Safety InStructIonS