Derale Performance Dual 12" Electric Tornado Fan Kit - Manual

16824-16834-InstructionSheet
Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com
Left Hand
Bracket
Right Hand
Bracket
Right Hand
Bracket
Left Hand
Bracket
Center
Bracket
Center Bracket
M6 Square
Nut Inserts
M6-1.0 x 12mm
Washer Head
Hex Bolts
Fan Assembly (2)
INSTALLATION INSTRUCTIONS
DUAL TORNADO FANS WITH BRACKET SET
PART # 16824 & 16834
ASSEMBLY
MOUNTING
1. Slide 2 (two) each M6 Square Nut Inserts
into slotted openings into position in flat
landings on each end of electric fan
assemblies as shown in Illustration.
2. Align long slotted holes in Right Hand
Bracket and Left Hand Bracket with holes in
Center Bracket as shown, then run 2 (two)
each M6-1.0 x 12mm Hex Bolts (per fan)
through brackets and into M6 square Nut
Inserts on fans. Hand-tighten only.
3. Repeat Step 2 on opposite side of fan(s)
running M6 Bolts first through Right and Left
Hand Brackets, Center brackets. Hand
tighten all Bolts on each side.
4. Place entire fan/bracket assembly on flat
surface to “square up” assembly, then
carefully tighten all four M6 Bolts snugly. DO
NOT OVERTIGHTEN. Dual Fan Assembly is
complete.
1. Position the Electric Fan in the desired location.
Taking the Angle Brackets supplied determine
the best locations for a good rigid mount.
2. In some applications where the radiator
flange is not right up against the fan
assembly, long bolts can be used to space
Angle Brackets properly. Hardware not
included. (See Diagram #4)
In some cases the radiator flange
may have to be drilled for proper alignment.
Note:
KIT CONTENTS
QTY. DESCRIPTION
2 Tornado Electric Fan
2 Center Bracket
2 Right Hand Bracket
2 Left hand Bracket
2 Center Bracket
IMPORTANT
This fan assembly is designed
for PULLER APPLICATIONS
Engine side of radiator.
(See Diagram #1)
ONLY
Diagram #1
Engine
Puller Fan
Air Flow
Radiator
QTY. DESCRIPTION
2 Right Hand Bracket
2 Left hand Bracket
8 M6-1.0 x 12mm Bolts
8 M6 Square Nut Inserts
Diagram #2
Diagram #3
TOOLS NEEDED
7/16” Open End Wrench
7/16” Socket and Ratchet
Wire Stripper
Crimping Tool
Center Bracket
Right / Left
Hand Bracket
Diagram #4