Derale Performance 14" High Output Single RAD Pusher_Puller Fan with Premium Mount Kit - Manual

16212-16214-16217-InstructionSheet
INSTALLATION INSTRUCTIONS
HIGH OUTPUT SINGLE RAD FANS
PART # 16212, 16214, 16217
KIT CONTENTS
QTY. DESCRIPTION
1 High output RAD fan
4 Straight splined
ratchet brackets
4 90° splined ratchet brackets
4 Rubber isolators
8 M6 x 35mm socket head Bolts
4 M6 x 12mm Hex head Bolts
QTY. DESCRIPTION
4 Foam pads
4 Mounting rods
4 Mounting clips
8 M6 flat washers
8 M6 square nuts
4 M6 hex lock nuts
Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com
Mounting Options
Please read these instructions completely before beginning installation
(Continues on reverse side)
Diagram #1
Puller Fan Pusher Fan
Air Flow
Engine Radiator
Mount ‘A’
Using Nylon
Tie Strap
Mount ‘B’
Using single
bracket,
bolting to top
of radiator
Mount ‘C’
Using a 2nd
optional bracket,
bolting to top of
radiator
Mount ‘D’
Using a 2nd
optional bracket,
plus rubber
isolator, bolting
to top of radiator
IMPORTANT
This fan assembly is designed for both PULLER and
PUSHER APPLICATIONS.
(See Diagram #1)
Mount ‘A’
Using Nylon Tie Strap
Mount ‘B’
Mounting Clip
Radiator
Foam Pad
Rubber
Isolator Mounting
Rod
Mounting Rod passes
through radiator. End of
Mounting Rod clipped off
after Mounting Clip is
cinched down.
Using splined ratchet brackets and
90° splined ratchet brackets, bolt to
top of radiator.
Radiator Top
M6 Hex
Lock Nut
M6 Square
Mount Nuts
Splined Ratchet
Bracket
M6 Flat
Washer
90° Splined
Ratchet
Bracket
M6 Flat
Washer M6 x 35
Socket
Bolt
M6 x 12
Hex Head
Bolt
M6 x 35
Socket
Bolt