Derale Performance High Output Dual 13" Electric RAD Copper_Aluminum Shroud Kit - Manual

16826-16830-16833-16835-16837-16842-InstructionSheet
INSTALLATION INSTRUCTIONS
HIGH OUTPUT DUAL RAD FAN ASSEMBLY
PART # 16826, 16830, 16833, 16835, 16837 & 16842
KIT CONTENTS
QTY. DESCRIPTION
1 Fan Shroud Assembly
4 Angle Brackets
1 Rubber Fan Shroud Seal
QTY. DESCRIPTION
16 1/4-20 x 3/4” Hex Bolts
16 1/4-20 Nyloc Nuts
40 1/4 Flat Washers
Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com
Diagram #1
Engine
Puller Fan
Air Flow
Radiator
Diagram #2
Please read these instructions completely before beginning installation
Flaps open at bottom. Do not
mount with flaps opening at top.
Cross Flow Radiator
Brackets Provided
Shroud should be mounted tight against radiator to minimize air leaks that would reduce efficiency.
MOUNTING OPTIONS
Down Flow Radiator
Brackets Provided
Flap
IMPORTANT
This fan assembly is designed for PULLER APPLICATIONS
ONLY Engine side of radiator. (See Diagram #1)
TOOLS NEEDED
7/16” Open End Wrench
7/16” Socket and Ratchet
Wire Stripper
Crimping Tool
Diagram #3
Option 1
Flush Mount
Angle
Bracket
Option 2
Recessed Mount
Rubber Seal Rubber Seal
Angle
Bracket
Adjustment Range
3 3/4”
Adjustment
Range
(Page 1)
Diagram #4
Revised-12/07/2011