Diagram #7, Wiring diagram using relays (not supplied), Relay – Derale Performance High Output Dual 13" Electric RAD Copper_Aluminum Shroud Kit User Manual
Page 3: Fan #1 fan #2
![background image](/manuals/287534/3/background.png)
Derale Performance, Los Angeles, CA
800.421.6288 www.derale.com
Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on
vehicles. Always use eye protection (goggles, safety glasses or shield). Park the vehicle in a well lit area, on level ground and apply the
parking brake. Only work on a cold vehicle that has been sitting overnight, failure to do so will result in severe burns and injury. Before starting
the vehicle, make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.
Failure to follow instructions can lead to severe damage and personal injury.
Diagram #7
87
87A
30
86
85
Orange
Fan (+)
Green/
Yellow
Switch (+)
Red
Battery (+)
Black
Ground (-)
Relay
Relay
Red
Orange
Yellow
Black
Green
To Positive (+) side of battery
To (+) 12V Switched Power
To ground (-)
To A/C clutch (+)
Blue Wire (+)
Black Wire (-)
To chassis ground (-)
NOTE: To confirm color of positive fan leads see Red/Silver
manufacturers label on the electric fan.
Relay
Red
Orange
Yellow
Black
Green
To Positive (+) side of battery
To (+) 12V Switched Power
To ground (-)
To A/C clutch (+)
Blue Wire (+)
Black Wire (-)
To chassis ground (-)
Fan #1
Fan #2
(Page 3)
Wiring Diagram Using Relays (Not Supplied)