Prokit's Industries MT-7062 - Manual (Page 3)

CONTENTS
Your MT-7062 HDMI Cable Tester contains the following：
1.
1 x Master unit
2. 1 x Remote unit
3. 1 x Pouch bag.
4. Users’ Manual.
FEATURES：
The MT-7062 HDMI cable tester allows the fast and accurate
verification both HDMI type A and Type C cables, mapping continuity
and proper configuration and displays 19 pins and shield connection
status on both master and remote unit.
 For HDMI cables Type A, C
Test all HDMI cables with Type A to A, A to C and C to C
connectors, especially for fragile, easily damaged HDMI patch
cord and in-wall HDMI cables.
 Loopback function
Design with loopback function allows test HDMI type A to A, A to
C on master unit.
 3 Test Modes
Fast continuity scans for testing all conductors’ status in a cable.
Slow continuity scans for testing all conductors’ status in a cable.
Manual test for step by step scan detecting of individual
conductors’ situation.
 HDMI Cable Mapping
Automatically detect wiring on HDMI type A or type C condition in
straight、short、open、crossover in pin #1~#19 and Shield
conductor.
 Troubleshooting
Quickly troubleshoot and verify HDTV installation and DIY
termination in the field.
SPECIFICATIONS：
 Cables Tested：HDMI cables with Type A & C connectors
conforming to 1.0, 1.1, 1.2, 1.2a, 1.3, 1.3a, 1.3b, 1.3c, 1.4, 1.4a
Category 1 and Category 2 cables.
 Support test (master unit and remote unit)：19 pin-to-pin wire
map and shielding detection.
2
 Test interface of Master unit：HDMI (type A) ×2 pcs, Mini HDMI
(type C) ×1 pcs.