Prokit's Industries MT-7062 - Manual (Page 13)

BATTERY LIFE AND REPLACEMENT：
Caution

To avoid unreliable test results, replace the battery as soon as
the low battery indication appears.
Warnings

To avoid possible electric shock or personal injury, turn off the
master unit and disconnect all test leads before replacing the
battery.
Battery Status：When ”POWER/LOW BATT.” LED is flashing on the
master unit, it means the battery voltage is under 6.0V which couldn’t
power the device on. Please replace the battery as the following
step：
1.
Turn off the master unit and disconnect all test leads before
replacing the battery.
2.
Properly replace the battery into the battery case.
3.
Use only a DC 9V(NEAD 1604/6F22) battery.
HDMI® is a registered trademark of HDMI Licensing, LLC.
MT-7062 HDMI測試器使用手冊
產品概述
Pro’sKit MT-7062 HDMI測試器，是為專業的HDMI安裝而設計。這種
方便攜帶的測試器，可以提供安裝工程師快速測試、檢修、查證HDMI(高
清晰多媒體接口)電纜線。MT-7062是用於測試HDMI電纜線電路狀態，
適用於具有A和C接口，符合 1.0, 1.1, 1.2, 1.2a, 1.3, 1.3a, 1.3b, 1.3c,
1.4, 1.4a 第1類和第2類的HDMI電纜線。配備3種測試模式：自動快速
/慢速掃描和手動單步測試。這測試器可以測試HDMI電纜線內RGB訊
號芯線導體的直通、短路、斷路、交叉…等狀態。
安全須知
12
在使用和維護Pro’sKit的設備，安全是重要的！本說明書和任何標示在
測試器上提供的訊息，是為避免危險和不安全的作法，使用這測試器。
請遵守所有安全資訊規範。