Prokit's Industries MT-7062 User Manual
Page 2
DESCRIPTION
The Pro’sKit MT-7062 HDMI Cable Tester is designed for
professional HDMI installations. This portable device allows installers
to quickly test, troubleshoot, and verify HDMI (high definition
multimedia interface) cables. MT-7062 is designed to test wire circuit
state of HDMI cables with Type A & C connectors conforming to 1.0,
1.1, 1.2, 1.2a, 1.3, 1.3a, 1.3b, 1.3c, 1.4, 1.4a Category 1 and
Category 2 cables
Equipped with 3 test modes, Automatically fast/slow scan or manual
test for step by step, this tool can either test the conductors in
straight、short、open、crossover in all RGB conductors.
SAFETY INFORMATION
Safety is essential in the use and maintenance of Pro’sKit equipment.
This instruction manual and any markings on the tool provide
information for avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information provided.
Warnings
Do not connect tester to a live circuit as it may damage the unit.
It is easy to damage this tester with charged HDMI lines.
Caution
Read all instructions in this manual before using this tester.
Failure to do so may result in damage to the tester or injury to the
user.
Do not drop or get the unit wet. Do not expose tester to extreme
humidity or direct sunlight.
Do not use this tester with its case open, or with parts removed.
Doing so may damage the tester and/or injure the user.
Repairs and maintenance must only be carried out by qualified
service personnel or qualified electricians/technicians who know
the dangers.
Follow the recommendations of any Trade Organizations or
Regulatory Agencies whose scope encompasses the use of this
tester or injury to the user.
Remove the battery when the tester not in use for longer than a
month. Chemical leakage from the battery could damage the
tester.
1
Please use batteries according to the specification; otherwise it
may result in damage to equipment.