Fault reset, Firmware upgrade – Sena Bluetooth SPH10H-FM v4.3 User's Guide User Manual
Page 36
English
SPH10H-FM
35
22. FAULT RESET
When the SPH10H-FM is not working properly or is in
faulty status for any reason, you may reset by pushing
the pin-hole reset button at the back of the headset
main unit. Insert a paper clip into the reset pin-hole and
press the reset button for a second with light pressure.
The SPH10H-FM will be switched off after which time,
you have to turn the system back on and try again.
However, this will not restore the headset to factory
default settings.
23. FIRMWARE UPGRADE
The SPH10H-FM supports firmware upgrade
function. Please visit Sena Bluetooth web site at
e
downloads.