Sena Bluetooth SPH10H-FM v4.3 User's Guide - Manual (Page 18)

English
SPH10H-FM
17
9. SPH10H-FM CONFIGURATION
SETTING
You can set the configuration of the SPH10H-FM by the
voice menu instruction as below.
1. To enter into voice configuration menu, press and
hold the Jog Dial for 12 seconds until the LED shows
solid blue and you hear high tone double beeps. You
will also hear a voice prompt saying “Configuration
menu”.
2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items as below.
3. You can enable the feature or execute the command
by tapping the Phone Button, or disable the feature
by tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the
SPH10H-FM will exit the configuration and goes back
to stand-by.
5. If you want to exit the configuration immediately,
rotate the Jog Dial until you hear a voice prompt,
“Exit configuration”, and tap the Phone Button.
The voice prompt for each menu item is as below:
(1) Speed dial (5) RDS AF setting
(2) VOX phone (6) Delete all pairings
(3) VOX intercom (7) Exit configuration
(4) Voice prompt
RDS AF setting
Exit configuration
Delete all pairings
Speed dial
VOX phone
VOX intercom
Voice prompt
9.1 Assigning Speed Dial
Voice Prompt “Speed dial”
Factory Default N/A
Execute Tap the Phone Button
1. To assign a phone number as a speed dial, rotate
the Jog Dial until you hear a voice prompt saying
“Speed dial”.