Sena Bluetooth SPH10H-FM v4.3 User's Guide - Manual (Page 11)

SPH10H-FM
10
4. Enter 0000 for the PIN. Some mobile phones may not
ask for the PIN.
5. The mobile phone confirms that pairing has completed
and the SMH10H-FM is ready to use. You will hear
a voice prompt from the SMH10H-FM saying “Your
headset is paired”.
6. If you want to pair a GPS by multipoint pairing, search
for the Bluetooth device on the GPS screen, and
select the Sena SMH10H-FM at step 3. Please refer
to the section “6.4.1 Multipoint GPS Pairing” for more
details.
7. If you want to pair the Sena SR10, Bluetooth adapter,
please refer to the section “6.5 Pairing with the Sena
SR10, Bluetooth Two-way Radio Adapter”.
6.3 Bluetooth Stereo Device Pairing
1. If the Bluetooth stereo device is integrated with the
mobile phone such as smartphones, you don’t need
to pair the SPH10H-FM with it separately. When the
SPH10H-FM is paired with the mobile phone, it is also
paired as a stereo music device.
2. If you have a stand alone Bluetooth stereo device,
follow the pairing procedure separately. The procedure
is the same as the procedure in “6.1 Mobile Phone
Pairing”.
3. Enter 0000 for the PIN. Some mobile phones may not
ask for the PIN.
4. The mobile phone confirms that pairing has completed
and the SPH10H-FM is ready to use. You will hear a
voice prompt from the SPH10H-FM saying “Your
headset is paired”.
5. If the pairing process is not completed within three
minutes, the SPH10H-FM will return to stand-by mode.
6.2 Multipoint Pairing
Typical Bluetooth headsets can connect with only one
HFP (Hands-Free Profile) device, but multipoint pairing
allows the headset to connect with two HFP devices
at the same time. So, when you already have a mobile
phone connected with the SPH10H-FM, you can also
pair and connect a second mobile phone or other HFP
devices such as GPS or Sena SR10, Bluetooth adapter.
1. To pair the second mobile phone, press the Jog
Dial for 5 seconds again until the red LED is rapidly
flashing and you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then
the LED turns to blue flashing and the beeps turn to
high tone double beeps. You will hear a voice prompt
saying “Multipoint pairing”.
3. Search for Bluetooth devices on your mobile phone.
Select the Sena SMH10H-FM in the list of the devices
detected on the mobile phone.