Sena Bluetooth SPH10H-FM v4.3 User's Guide - Manual (Page 10)

English
SPH10H-FM
9
5. VOLUME ADJUSTMENT
You can easily adjust the volume by rotating the Jog
Dial. You will hear a beep when the volume reaches
maximum or minimum level. The volume is set and
maintained independently at different levels for each
audio source even when you turn off and on the
headset. For example, once you set the volume for
mobile phone handsfree, it will not change even if you
adjust the volume when you hear Bluetooth MP3 music.
So you can always maintain the preferred optimum
volume level for each audio source.
6. PAIRING THE SPH10H-FM
WITH BLUETOOTH DEVICES
Before using the SPH10H-FM Bluetooth headset with
any of Bluetooth devices for the first time, you need to
do the pairing operation. It can be paired with Bluetooth
mobile phones, Bluetooth stereo devices such as MP3,
or motorcycle specific Bluetooth GPS, and with other
Sena Bluetooth headsets. This pairing operation is only
required once for each Bluetooth device. The headset
will remain paired with the devices and automatically
connects to the paired devices again when they are
within range. You will hear a high tone single beep
and a voice prompt when the headset connects to the
paired device automatically: “Phone connected” to
a mobile phone, “Media connected” to a Bluetooth
stereo device.
6.1 Mobile Phone Pairing
1. Turn on the SPH10H-FM and press the Phone Button
for 5 seconds until the LED flashes red and blue
alternately and you hear multiple beeps. You will hear
a voice prompt saying “Phone pairing”.
2. Search for Bluetooth devices on your mobile phone.
Select the Sena SPH10H-FM in the list of the devices
detected on the mobile phone.