Peerless-AV SA771PU-AW - Installation - Manual (Page 9)

9 of 56 ISSUED: 03-09-12 SHEET #: 095-9386-2 03-26-12
NOTE: If screen has a VESA 400 horizontal
mounting pattern, skip to step 3-4 or 3-5 on page
11.
NOTE: For VESA 200x200 or VESA 200x100
mount hole patterns, skip to step 4 on page 12.
NOTE: For dedicated PLP plate installation skip to
step 5 on page 14.
Remove four 1/4-20 x .6" screws using 5mm allen
wrench (I) and loosen two 1/4-20 x 1.25" screws
1/2 turn to allow for screen bracket adjustment.
To prevent scratching the screen, set a cloth on a fl at, level surface that will support the weight of the screen.
Place screen face side down and refer to screen manufacturers instructions for removing obstructions from the
back of the screen. Adjust screen brackets to align with screen mounting holes.
Measure horizontal mounting hole pattern and choose fi xed stop-position from chart below.
3-2
3-1
Installing Adapter Brackets to Screen
FIXED STOP-POSTION #2
FIXED STOP-POSTION #1
FIXED STOP-POSTION #3
horizontal mounting hole pattern fixed stop-position
10-3/4" - 16-1/16" (273 - 408 mm) #1
15-1/16" - 21-9/16" (383 - 548 mm) #2
20-7/16" - 27-9/16" (519 - 700 mm) #3
26-1/16" - 32-9/16" (661 - 827 mm) #4
FIXED STOP-POSTION #4
1/4-20 x .06" SCREWS
1/4-20 x 1.25" SCREWS