Peerless-AV SA771PU-AW - Installation - Manual (Page 14)

14 of 56 ISSUED: 03-09-12 SHEET #: 095-9386-2 03-26-12
A
B
B
E
ADAPTER PLATE
ADAPTER
PLATE
SCREEN NOT SHOWN
FOR CLARITY
• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
handle placement of the screen.
• Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten M10 x 15mm
screws (E) to 40 in. • lb (4.52 N.M.) maximum torque.
WARNING
1/4"
For Dedicated PLP Plate (not evaluated by UL):
Refer to PLP model instruction sheet for attachment
of dedicated PLP plate to screen.
Install two M10 x 15mm screws (provided with
dedicated PLP plate) into top two holes of dedicated
PLP plate leaving 1/4" of exposed thread as shown
in fi gure 5.1.
Insert two M10 x 15mm screws (E) into bottom holes of adapter plate as shown in fi gure 5.3 or 5.4. Tighten all
fasteners with 6mm allen wrench (H). 5-1
Mounting Flat Panel Screen
5
For Universal Adapter Bracket: Hook M10 x 15mm
screws into keyslots of wall arm adapter plate (A) as
shown fi gure 5.2.
A
DEDICATED
PLP PLATE
ADAPTER PLATE
M10 X 15MM
SCREW
1/4"
fi g. 5.1
fi g. 5.3 fi g. 5.4
fi g. 5.2
E
DEDICATED PLP PLATE
ADAPTER PLATE