Peerless-AV PLCK-UNL - Installation User Manual

Page 7

ISSUED:02-22-07 SHEET #: 202-9197-5 (2013-10-01)

Visit the Peerless Web Site at www.peerless-av.com

For customer care call 708-865-2112.

7 of 9

Begin with the shortest length screw, hand thread through multi-washer and adapter bracket into screen as
shown below. Screw must make at least three full turns into the mounting hole and fi t snug into place. Do not
over tighten. If screw cannot make three full turns into the screen, select a longer length screw from the baffl ed
fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.

NOTE: Spacers may not be used, depending upon the type of screen.

Begin with longer length screw, hand thread through multi-washer, adapter bracket and spacer in that order into
screen as shown below. Screw must make at least three full turns into the mounting hole and fi t snug into place.
Do not over tighten. If screw cannot make three full turns into the screen, select a longer length screw from the
baffl ed fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.

For Flat Back Screen

For Bump-out or Recessed Back Screen

SCREEN

MULTI-WASHER

SCREW

ADAPTER BRACKET (BB)

SPACER

4-1

4-2

ADAPTER BRACKET (BB)

SCREEN

MULTI-WASHER

SCREW

If you have any questions, please call Peerless customer care at 1-800-865-2112.