Peerless-AV PLCK-UNL - Installation - Manual (Page 5)

ISSUED:02-22-07 SHEET #: 202-9197-5 (2013-10-01)
Visit the Peerless Web Site at www.peerless-av.com For customer care call 708-865-2112.
5 of 9
Attaching Tilt Bracket to Plasma Or LCD Screen For PLCK-1
4
ADAPTER PLATE
PLASMA SCREEN
Note: Skip to page 6 for PLCK-UNL installation.
Note: Refer to adapter plate instruction sheet (sold separately) for attachment of adapter plate to plasma or LCD
screen before proceeding with step 4. Note: Screen and adapter plate may appear different than illustrated.
LANDSCAPE
ADAPTER PLATE
PLASMA SCREEN
ADAPTER PLATE
LCD SCREEN
B
G
B
G
B
J
LCD SCREEN
Hang tilt bracket (B) onto ceiling arm box (A). Adjust
tilt as desired and tighten four M10 x 1.5 x 15 mm
penta-pin screws (G) securely using M10 penta-pin
tool (H).
B
A
G
• For a safe assembly be sure to fully tighten four
screws (G).
WARNING
Hang The Tilt Bracket on the Ceiling Arm Box For PLCK-1
PORTRAIT
(NOT to be used
with UNL models)
5
Attach tilt bracket (B) to adapter plate using four M10 x 15 mm penta-pin screws (G) as shown in fi gure 4.2 and 4.3.
Tighten using M10 penta-pin tool (H).
Attach tilt bracket (B) to adapter plate using four M5 x 8 mm phillips screws (J) as shown in fi gure 4.1.
PLASMA SCREEN
fi g. 4.1
fi g. 4.2
fi g. 4.3