Peerless-AV HP455 - Installation - Manual (Page 8)

ISSUED: 06-28-12 SHEET #: 125-9328-2 8 of 9
7.87"
(200 mm)
7.87"
(200 mm)
7.87"
(200 mm)
3.93"
(100 mm)
Mounting using Small Hole Pattern (200 mm x 200 mm or less)
Detail 5 Detail 6
Attach tube gussets ( R), lower horizontal rail (S), and
upper horizontal rail ( V) onto support tube (A) using
two 1/4-20 x 3/4" hex head screws ( H) with two 1/4" split
washers ( U) as shown below. NOTE: Use details 5 and
6 when determining the placement of adapter rail ( S)
and upper horizontal tube ( V).
9 10 Position tube gussets ( R) inside slots in lower
horizontal rail ( S) and upper horizontal rail (V) as
shown below.
A
R
S
V
V
SLOT
SLOT
H
U