Peerless-AV WL-SR560M-200 - Installation - Manual (Page 18)

18 of 19 ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12
Cord Management
Run extension cord (not included) through upright (G) using cord
management holes.
28
CORD
MANAGEMENT
G
© 2012 Peerless Industries, Inc.
Peerless-AV® is a registered trademark of Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Mounting and Removing Flat Panel Screen
Hook adapter brackets (F) onto universal plate (E),
then slowly swing screen in as shown. Turn
screws of adapter plate (F) clockwise at least six
times to prevent screen from being removed as
shown in detail 7.
NOTE: Tighten using 4 mm allen wrench (N).
Screen can be adjusted horizontally if desired.
NOTE: It is important to lock screen down! To
lock the screen down, fully tighten screws to adapter
bracket as shown in detail 7.
To remove screen from mount, loosen screws,
swing screen away from mount, and lift screen off of
mount.
• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.
WARNING
27
F
DETAIL 7
SCREWS
E
F
E
To complete the installation of your wireless mount, please refer to the HD Flow™ User's Manual and the HD
Flow™ Install Guide included. 29