Peerless-AV HT642-003 - Installation - Manual (Page 8)

8 of 8 ISSUED: 07-07-11 SHEET #: 125-9221-1
© 2010 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
8 Remove top two M5 x 12 mm socket pin serrated washer head screws ( D) attached to wall plate (A). Loosen two
M5 x 12 mm socket pin serrated washer head screws ( D) in slot as shown in Detail 1. Once desired tilt is
established tighten two M5 x 12 mm socket pin serrated washer head screws ( D) in slots.
Mounting Bracket Using Tilt Option
D
B
D
A
Detail 1
D
SLOT
D