Peerless-AV HT642-003 - Installation - Manual (Page 4)

4 of 8 ISSUED: 07-07-11 SHEET #: 125-9221-1
Use a stud finder to locate center of studs.
For mounting to 16" centers
Using mounting bracket ( A) as a template, drill four 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64
mm). Attach mounting bracket ( A) to centers of wood studs using four #14 x 2.5" wood screws (E) and four
washers ( I) as shown below.
Attach adapter bracket ( B) to back of plasma screen using four M8 x 16 mm phillips screws (G).
• Do not overtighten. Overtightening may cause per-
manent damage to the screen. Torque to 26-35 in • lb
(30-40 kg • cm).
WARNING
1
2
A
E
I
Installation to Wood Stud Walls
Attaching Adapter Bracket to Screen
B
Screen
400 mm
400 mm