PowerWalker ATS User Manual
Page 3
EN
3. Important Safety Warnings
Before using the unit, please read all instructions and cautionary markings on the unit, this
manual and the batteries.
WARNING!! The ATS must be connected to earth when in use.
In line with current regulations, only use the cables that have been supplied with the machine. The
power supply socket must be easily accessible to the operator.
WARNING!! The ATS has been designed exclusively to operate indoors. It is advisable to install it in
areas where no inflammable liquids or gases, or other harmful or noxious substances, have been
stored.
ATTENTION!! A soft damp cloth may be used to clean the outside of the machine (always with the
system disconnected from the mains power supply and users).
Do not use any type of solvent as this may damage the external finishing of the machine.
ATTENTION!! The ATS has been designed exclusively for professional use.
NOTE: These instructions may be modified by the wiring regulations in force in the country where
the ATS is purchased.
4. Operation Indicators & Status
Source preference selector
Priority setting LEDs
Power source status LEDs
Output source LEDs
Fault indicator
Alarm mute button