B&B Electronics 232BRC - Manual User Manual
Page 16

14
2232BRC-0812Manual
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91 792444 – Fax +353 91 792445
Figure 3.1 Setup Jumper Location
Software Installation
The setup software for the 232BRC must be installed on your
hard drive before it can be run.
Software Uninstall
To remove the 232BRC setup software, follow these steps:
Select SETTINGS, CONTROL PANEL from the Windows
START menu.
Double Click ADD/REMOVE PROGRAMS
Select 232BRC SETUP from the list of installed programs.
Click the ADD/REMOVE button to remove the software
components.
Setup Tutorial
Step 1: Start the software by double clicking the
232BRC Setup icon on the desktop.
Step 2: Select the serial (COM) port that will be used to configure
the 232BRC.
Step 3: Connect the 232BRC Port A to the PC COM port selected.
Install the setup jumper, and power up the 232BRC. When Next
is clicked, the software reads the current configuration of the
connected unit and displays the Main Screen.