B&B Electronics 857-11911--29 - Manual - Manual (Page 17)

14
PoE+ Giga-MiniMc 1x9
DIP
Switch
Name Description Default
Setting
1 PoE Reset 2 ON forces Port 2 PoE OFF on LOS of Fiber
input OFF
2 PoE Reset 1 ON forces Port 1 PoE OFF on LOS of Fiber
input OFF
3 Factory Set Do not change OFF
4 Factory Set Do not change OFF
5 Factory Set Do not change OFF
6 Factory Set Do not change OFF
PoE Reset 1 and PoE Reset 2 DSW
When set to ON, it will force the PSE output power on the copper port OFF when
the LINK state is lost on the fiber segment. By default, the DSW is set to OFF.