B&B Electronics 232BSS4 - Manual - Manual (Page 32)

28 Documentation Number 232BSS4 0812 Manual
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
#2 tab is selected. The user should not have to reload the configuration
except when the parameters need to be reset to those already saved in
the switch. The load configuration button will load the configuration
from the connected switch and assume these apply to the selected Unit.
View Module Configuration:
Each unit’s configuration can be reviewed on one screen by selecting
the appropriate tab and clicking the View Module Configuration
button. Any changes from what was read from the switch will be
shown in red. The page can then be printed to the default Windows
printer for review or for attachment to the switch.
Configure Switch:
Before exiting the program, all changes should be saved to the
switches. The parameters will be saved to the connected switch. Care
should be taken to ensure that the correct Unit is connected, its setup
jumper installed, and power applied before saving.
NOTE: Once changes are saved to the switch they cannot be reset
automatically. Be sure to review all changes before saving.