B&B Electronics LDVDSV2-1587-P1D - Datasheet User Manual
Advanced obdii data streamer

LDVDSV2-1587_2313DS
Page 1
Supported Parameters
Vehicle Identification Number
Vehicle Speed - Monitor aggressive driving
Engine Speed - Monitor idle time and engine abuse
Throttle Position
Odometer/Distance Traveled - Monitor trip distance
and HOS
Instantaneous Fuel Rate in Gallons per Hour
Total Fuel - Monitor MPG & Protect against theft
Ignition status
– Track Idle time
Battery Voltage
– Watch for charging system failures
PTO Status - Automatically figure fuel tax savings
Diagnostic Trouble Codes
MIL Status
Emissions Readiness Monitors - Check remotely if
vehicles are ready for emissions certification
Brake Switch Status and Seatbelt Fastened available
on most Ford & GM trucks/vans
Other parameters available on a custom basis
Model LDVDSV2-1587
Advanced OBDII Data Streamer
The B&B Electronics AutoTap
™
OBDII Data Streamer Model LDVDSV2 connects your PC, driver terminal, Java-enabled
phone, or other on-board computing device to the OBDII diagnostic bus of light and medium duty vehicles. It enables the
retrieval of the most commonly used parameters of value in telematics and fleet management applications.
The LDVDSV2 provides a simple operational protocol to communicate to the OBDII bus. It provides a common interface and
deterministic response time for all vehicles. The complete Command and Response protocol is published on B&B’s website
On-Board Computer
w/GPS & Wireless
Light or Medium Duty Car or
Truck
OBDII Y-Cable
J1708
Supported Vehicles
The OBDII Streamer supports any 1996 or newer vehicles that
comply with the SAE’s J1979 OBDII specification.
Supported Protocols
SAE J1850 VPW
SAE J1850 PWM
SAE J2284/ ISO 15765 (CAN)
ISO 9141-2
ISO 14230-4 (KWP2000)