B&B Electronics 7010TX - Manual - Manual (Page 151)

(Revised 2010-2-24) Page 151 of 153
KEY SPECIFICATIONS (7010TX)
Switch Properties
Number of MAC Addresses:
8,000
Aging Time:
Programmable
Latency Type: 2.6 µs
Switching Method: Store & Forward
Physical
Height:
4.63” / 11.76cm
Width: 2.40” / 6.10 cm
Depth: 5.30” / 13.47cm
Weight (max): 1 lb 6.2 oz/ 0.63 kg
Din-Rail mount: 35mm
Electrical
Redundant Input Voltage: 10-49VDC (Regulated)
Input Current (max): 410mA max. @ 24VDC
Input Ripple:
Less than 100 mV
N-TRON Power Supply: NTPS-24-1.3 (1.3 Amp@24VDC)
Environmental
Operating Temperature:
-40°C to 70°C
Storage Temperature: -40°C to 85°C
Operating Humidity: 5% to 95%
(Non Condensing)
Operating Altitude 0 to 10,000 ft.
Shock and Vibration
(bulkhead mounting)
Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz,Triaxial
Reliability
MTBF: >2 Million Hours
Warranty: 3 years from the date of purchase.
Connectors:
10/100BaseTX: (8) RJ-45 Copper Ports
Optional SFP Ports:
1000BaseT:
Up to two (2) RJ-45 Gigabit Copper Ports (optional)
1000BaseSX: Up to two (2) LC Duplex Gigabit Fiber Ports (optional)
Recommended Wiring Clearance:
Front: 2" (5.08 cm)
Top:
1" (2.54 cm)
Bottom: 1" (2.54 cm)
Network Media
10BaseT:
>Cat3 Cable
100BaseTX: >Cat5 Cable
1000BaseT: >Cat5e Cable
minimum length : 1 meter
maximum length : 100 meters