B&B Electronics 7010TX - Manual - Manual (Page 102)

(Revised 2010-2-24) Page 102 of 153
BPCL – Broadcast Packet Count Limit Configuration
The BPCL link will display all the ports that are installed in the 7010TX Series unit and will list the BPCL
Percentage for each port. BPCL defaults to 3% for 10/100 ports and 1 % for gigabit ports. A Modify button
is provided to change these fields.
Following the Modify button on the above example, the administrator can modify the BPCL Percentage for
each and every port.