B&B Electronics 702M12-W - Manual - Manual (Page 49)

(Revised 8/3/2009) Page 49 of 53
702-W Key Specifications
Switch Properties
Number of MAC Addresses:
10,000
Number of IP Addresses: 1024
MAC Aging Time: 300 seconds
ARP Aging Time: 60 seconds
Latency (Typical): < 1ms
Switching Method: Store & Forward
Physical
Height: (w/o antennas)
4.75” / 12.065 cm
Width: 7.0” / 17.78 cm
Depth: (w/ DIN-Rail CLIP) 1.17” / 2.9718 cm
Weight (max): 1.9 lbs / 0.86kg
Din-Rail mount: 35mm
Electrical
Redundant Input Voltage: 20-49VDC (Regulated)
702-W Input Current (max): 200mA max. @ 24VDC
702-W Max Power: 4.8Watts max
Input Ripple: Less than 100 mV
N-TRON Power Supply: NTPS-24-1.3 (1.3 Amp@24VDC) (NOTE: Not appropriate for use with
M12, POE, and HV models.)
Environmental
Operating Temperature: -40°C to 70°C
Storage Temperature: -40°C to 85°C
Operating Humidity: 5% to 95%
(Non Condensing)
Operating Altitude 0 to 10,000 ft.
Reliability
MTBF: >1 Million Hours
Warranty: 3 years from the date of purchase.
Connectors
10/100BaseTX: (1) RJ-45 Copper Port (w/ PoE Support)
802.11abgn: (3) RP-SMA Connectors
Recommended Wiring Clearance:
Side: 4" (10.16 cm)
Top: 6" (15.24 cm) – Dependent on antenna
Network Media
10BaseT:
>Cat3 Cable
100BaseTX: >Cat5 Cable
minimum length : 1 meter
maximum length : 100 meters