B&B Electronics 850-10953-DC - Manual - Manual (Page 14)

14
Type the name of the action and press Enter.
• tasks
Displays the task list including the task priority.
• memory
Displays the memory usage.
• cleandb
Removes all information in the database except the IP address of device.
• download
Opens the firmware TFTP download screen.
• version
Displays the firmware version and build date.
• reboot
Reboots the unit.
• accounts
Allows management of Usernames/Passwords account. Administrators must
maintain a password list.
• modules
Displays a list of installed modules including slot location.
Downloading Files
The iMediaChassis/3 accepts firmware downloads from a central server by using TFTP
protocol. Use serial configuration or a Telnet session to perform this download.
Make sure the IP Address and the name of the file are correct in the Current Values
section of the Main Configuration screen. If this information is not correct, make the
appropriate changes. To download a file, press the Space Bar from the Command
List section of the Main Configuration screen (serial configuration). Type download
and press Enter to display the Download a File screen. This screen displays the IP
Address of the TFTP server and the name of the file. Press Enter to start downloading
the file.
If the download is interrupted, do not reset the module or reboot the chassis. Close
the session, then open a new TFTP session.