B&B Electronics 857-18400 - Manual - Manual (Page 19)

15
The screen displays the current status for items 1 through 8. For security reasons, the
current username and password are not displayed.
For items 1 through 8, enter the number of the menu item to be changed, and then
enter the new value when prompted. The unit and port names can be assigned by
the end-user and are used in SNMP associated TRAP alarm messages.
Port Alarm Status Screen
The Port Alarm Status screen displays the status of the Host and Remote alarms on
each of the unit's ports. This screen can be refreshed as needed to display current
data.
SFP Line Status Screen
The SFP Line Status screen displays the status of the Host and Remote SFP links.
The detailed SFP information may be viewed by entering "1" for SFP A or "2" for SFP B.
Displayed data includes the manufacturer name, code, part number and revision
number. These values may not be modified.
For SFP modules that support DDMI values for temperature, voltage, diode current
and optical receive/transmit, levels can be obtained through SNMP Management
Module.