B&B Electronics 857-18400 - Manual - Manual (Page 18)

14
Main Menu
From the main menu, the end-user can view essential unit configuration data,
including active alarms in order of importance, and a clock indicating when the
displayed information was last refreshed.
Menu Options
1 = Refer to the Unit Configuration Screen
2 = Refer to the Port Alarm Status screen
3 = Refer to the SFP Line Status screen; SFP DDMI alarms are also displayed
4 = Refer to the Ethernet Port Configuration screen
5
= Refer to the Ethernet Port Status screen
6 = Refer to the E1 Port Configuration screen
7 = Refer to the E1 Port Status screen
NOTE
On all configuration screens, the title is the same as the "option" selected from the previous
screen.
Unit Configuration Screen
The unit configuration screen displays the names of the Host and Remote units as
well as the service state, whether fiber protection is enabled and the SFP BER alarm
level. In addition, the unit time can be set from this screen and the username and
password can be set/reset.