B&B Electronics 00-00234 - Manual - Manual (Page 5)

The LEX unit
The LEX unit connects to the computer using the attached USB cable. Power for this unit is provided by the
USB on the host computer.
Back View Top View
ITEM TYPE DESCRIPTION
1 Power LED (Blue)
LED turns on when power is supplied. Off when no power is
supplied.
2 Host LED (Green) LED turns on when Ranger is installed properly.
3 Extension Link Port (RJ45) Accepts RJ45 connector for CAT 5 cabling (or better).
4 Link LED (Green) on RJ45
Indicates connectivity between LEX and REX. LED turns on when
link between LEX and REX is established. Off when there is no link
between LEX and REX.
5
Activity LED (Amber) on
RJ45 Indicates activity on RJ45 port. LED blinks intermittently when
data is transmitted between LEX and REX.
6 Power/Config port Manufacturer use only.
7 USB Type A connector Used to connect the LEX unit to the host computer.
The Power/Config port on LEX is for manufacturer use only. No USB devices can be connected or used on the port.
4
3
4 5
6
LEX
1
2
7
USB 2.0 Extender