B&B Electronics 850-18610 - Manual - Manual (Page 7)

4
IE-iMcV-2xLIM, TX/SFP and Configuration Control
DIP Switch on
S1
Feature Default Setting
1 Auto Negotiation (AN) (Port
A) ON
2 FX LinkLoss (FXLL) (Port A) OFF
3 TX LinkLoss (TXLL) (Port A) OFF
4 Far End Fault (FEF) (Port A) OFF
5 Enable TX Port (Port A) ON
6 Auto Negotiation (AN) (Port
B) ON
7 FX LinkLoss (FXLL) (Port B) OFF
8 TX LinkLoss (TXLL) (Port B) OFF
9 Far End Fault (FEF) (Port B) OFF
10 Enable TX Port (Port B) ON
BEST PRACTICES
When possible, it is always a good idea to configure DIP Switches to match software