Rainbow Electronics MAX5066 - Manual (Page 4)

MAX5066
Configurable, Single-/Dual-Output, Synchronous
Buck Controller for High-Current Applications
4 _______________________________________________________________________________________
ELECTRICAL CHARACTERISTICS (continued)
(V IN = V REG = V DD = V EN = +5V, T A = T J = T MIN to T MAX , unless otherwise noted, circuit of Figure 6. Typical values are at T A = +25°C.)
(Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
CURRENT-ERROR AMPLIFIER (CEA_)
Transconductance g M 550 µS
Open-Loop Gain A VOL(CEA) No load 50 dB
VOLTAGE ERROR AMPLIFIER (EAOUT_)
Open-Loop Gain A VOL(EA) 70 dB
Unity-Gain Bandwidth f UGEA 3 MHz
EAN_ Input Bias Current I BIAS(EA) V EAN_ = 2.0V 100 nA
Error Amplifier Output Clamping
High Voltage V CLMP_HI
(EA)
With respect to V CM 1.14 V
Error Amplifier Output Clamping
Low Voltage V CLMP_LO
(EA)
With respect to V CM -0.234 V
EN INPUT
EN Input High Voltage V
ENH
EN rising 1.204 1.222 1.240
EN Hysteresis 0.05
V
EN Input Leakage Current I EN -1 +1 µA
MODE INPUT
MODE Logic-High Threshold V MODE_H 2.4 V
MODE Logic-Low Threshold V MODE_L 0.8 V
MODE Input Pulldown I PULLDWN 5 µA
THERMAL SHUTDOWN
Thermal Shutdown T
SHDN
160
Thermal Shutdown Hysteresis T HYST 10
°C
Note 1: The device is 100% production tested at T A = +85°C (MAX5066EUI). Limits at -40°C and +25°C and T A = T J = +125°C
(MAX5066AUI) are guaranteed by design.
Note 2: The internal reference voltage accuracy is measured at the negative input of the error amplifiers (EAN_). Output voltage
accuracy must include external resistor-divider tolerances.