Rainbow Electronics GM862-GPS User Manual
Page 76
Easy Script
in Python
80000ST10020a Rev.8 - 01/10/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 76 of 100
Control if the Setup options are the following:
Set the Module Main Port as the real COM port you have available (e.g. COM1 in the figure), check
the Python box and then select the Apply button.
• After this step, you will have 4 new Telit Serial Port Mux ports (see Control Panel – System –
Hardware – Device Manager) as in the figure below:
See also other documents in the category Rainbow Electronics GPS receiver:
- BT-R900 (2 pages)
- BT-R800 (2 pages)
- UC864 (36 pages)
- BT-R920 (2 pages)
- GM862-GPS (73 pages)
- GM862-GPS (120 pages)
- GM862-QUAD-PY (96 pages)
- GM862-QUAD-PY (63 pages)
- GM862-QUAD-PY (434 pages)
- GM862-QUAD-PY (68 pages)
- WE865-DUAL (22 pages)
- CF-R900 (2 pages)
- BT-R820 (2 pages)
- GT863-PY (50 pages)
- ATR0610 (13 pages)
- GT864-PY (23 pages)
- FARGO MAESTRO 100 (with TCP_IP) (787 pages)
- FARGO MAESTRO 100 (with TCP_IP) (16 pages)
- ATR0622 (26 pages)
- EB-A803 (9 pages)
- GE863-GPS low power (122 pages)
- EB-A801 (18 pages)
- GE863-PRO3 (55 pages)
- L10 (2 pages)
- GM-R800 (2 pages)
- GE863-PY (80 pages)
- ATR0600 (11 pages)
- GM-R305 (3 pages)
- GM-R900 (2 pages)
- ATR0630 (35 pages)
- DL-200BT-D (3 pages)
- DL-200 (3 pages)
- ATR0601 (17 pages)
- ATR0620 (15 pages)
- ATR0625 (26 pages)
- MG260 (87 pages)
- MG260 (246 pages)
- DL-100 (3 pages)
- GM-R500 (2 pages)
- EB-A802 (9 pages)
- ATR0621 (20 pages)
- EB-230 (10 pages)
- GM-R306-AA (2 pages)
- 900 (239 pages)