TC Electronic DB4 MKII - Manual (Page 49)

Downconvert 5.1
English Manual 45
Generator
Type
Range:
Sine (default), PinkNoise WhiteNoise,
LPF Pink Noise
(Low Pass Filtered Pink noise),
HPF Pink Noise
(Hi Pass filtered pink noise)
This parameter selects the Signal generator
type.
Sine Frequency
Range: 20 Hz to 20 kHz
Default: 1 kHz
Selects the frequency when Osc. Type is set to
Sine.
Output Level
Output Level (RMS)
Range: -60 to 0 dBFS
-60 to -6 dB in 1 dB steps
-6 to 0 dB in 0.1 dB steps
Default: -20 dBFS
Sets the level of the selected generator to all six
Output channels.
LFE Trim
Range: -12 to 0 dB, in 0.1 dB steps
Attenuates the LFE Output channel relative to the
main test-generator level.
Thru channels are “hardwired” without any ad-
justment options.