RocketFish RF-TVMP20 - User Manual - Manual (Page 6)

6 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)
RF-TVMP20 TV Wall Mount
STEP 2 - Determining your mounting configuration
1 Carefully place your TV screen face down on a cushioned, clean surface to protect the screen from damage
and scratches.
2 If your TV has a table top stand attached, remove the stand. See the documentation that came with your TV
for instructions.
3 Temporarily hold the flat surface of the arm assembly (B) against the back of your TV.
4 Identify the type of mounting configuration by determining if your arm assembly (B) lines up with the screw
holes on the back of your TV or if you will need to install the adapters (C).
5 Remove the arm assembly.
For 75 x 75mm or 100 x 100 mm mounting configurations, go to "STEP 3: Option 1- Attaching the arm assembly
without the adapters" on page 7.
-OR-
For a 100 x 200 mm, 200 x 200 mm, or 200 x 100 mm configuration, go to "STEP 3: Option 2 - Attaching the
adapters to the arm assembly" on page 8.
200mm (7-7/8”)
20
0mm (7-7/
8”)
10
0mm (3-15
/1
6”)
200mm (7-7/8”)
100mm (3-15/16”)
75mm (2-15
/1
6”
)
10
0mm (3-15
/1
6”)
75mm (2-15/16”)
100mm (3-15/16”)
20
0mm (7-7/
8”)
75 x 75mm
100 x 100 mm
100 x 200 mm
200 x 200 mm
200 x 100 mm
RF-TVMP20_13-0707_MAN_V2_ENG.fm Page 6 Wednesday, July 10, 2013 6:23 AM