RocketFish RF-TVMP20 - User Manual - Manual (Page 10)

10 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)
RF-TVMP20 TV Wall Mount
STEP 4 - Determine wall-mount location
Note:
• For more detailed information on determining where to drill your holes, visit our online height-finder at:
http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder
• Your TV should be high enough so your eyes are level with the middle of the screen. Normally, 40 to 60 inches
from the ground.
When your television is in a position closest to the wall and the arm assembly is horizontal, the center of your
television will be 13" to the left or right of the center of the wall plate (A). Before you drill holes in the wall:
1
Measure the distance from the bottom of your TV to the middle (half of the height of the TV). This is
measurement a.
2 Measure the distance from the floor to where you want the bottom of the TV to be positioned on the wall
when the arm assembly is horizontal. Keep in mind that this TV mount allows for 13" of travel in all directions
from the center of the wall plate. Your TV should be mounted in a position that will not cause it to come in
contact with furniture, or items placed on top of furniture (like a Blu-ray player or cable box). This is
measurement b.
3 Add a + b. This measurement is the height where you want the center of your TV to be.
4 Measure 13" to the left OR right of the a + b measurement position. This will be the desired position for the
center of the wall plate. This is measurement c.
5 Use a pencil to mark this spot on the wall.
You’ll need
a
b
c c
13” 13”
a
b
Measuring tape Pencil
RF-TVMP20_13-0707_MAN_V2_ENG.fm Page 10 Wednesday, July 10, 2013 6:23 AM