Cobalt Digital COMPASS 9035 Analog and SDI Input to SDI Output Converter - Manual (Page 5)

9035-OM (V4.4) 9035 PRODUCT MANUAL 1-1
Chapter 1
Chapter 1
Introduction
Overview
This manual provides installation and operating instructions for the
9035 HD/SD-SDI – Analog In Frame Sync with Audio Embedding/
De-Embedding and Dolby
® Decoding Option card (also referred to herein as
the 9035).
Note: This manual also covers the 9035-DEC, which is the 9035 card equipped with
Dolby
® decoding as an option. Where applicable, descriptions related exclu-
sively to the either the 9035 or the 9035-DEC are respectively denoted by
(9035 only) or (9035-DEC only). In all other aspects, both the 9035 and
9035-DEC function identically as described in this manual.
This manual consists of the following chapters:
• Chapter 1, “Introduction” – Provides information about this manual
and what is covered. Also provides general information regarding the
9035.
• Chapter 2, “Installation and Setup” – Provides instructions for
installing the 9035 in a frame, and optionally installing 9035 Rear I/O
Modules.
• Chapter 3, “Operating Instructions” – Provides overviews of
operating controls and instructions for using the 9035.
This chapter contains the following information:
• 9035 Card Software Versions and this Manual (p. 1-2)
• Manual Conventions (p. 1-3)
• Safety Summary (p. 1-4)
• 9035 Functional Description (p. 1-5)
• Technical Specifications (p. 1-22)
• Warranty and Service Information (p. 1-27)
• Contact Cobalt Digital Inc. (p. 1-28)