Cobalt Digital COMPASS 9035 Analog and SDI Input to SDI Output Converter - Manual (Page 26)

1
Technical Specifications
1-22 9035 PRODUCT MANUAL 9035-OM (V4.4)
Technical Specifications
Table 1-2 lists the technical specifications for the 9035 HD/SD Frame Sync
with Audio Embedding/De-Embedding and Dolby
® Decoding Option card.
Table 1-2 Technical Specifications
Item Characteristic
Part number, nomenclature • 9035 HD/SD-SDI – Analog In Frame Sync with Audio
Embedding/De-Embedding
• 9035-DEC HD/SD-SDI – Analog In Frame Sync with Audio
Embedding/De-Embedding and Dolby
®
Decoding Option
Installation/usage environment Intended for installation and usage in frame meeting openGear
modular system definition.
Power consumption < 15 Watts maximum
Environmental:
Operating temperature:
Relative humidity (operating or storage): 32° – 104° F (0° – 40° C)
< 95%, non-condensing
Frame communication 10/100 Mbps Ethernet with Auto-MDIX.
Indicators Card edge display and indicators as follows:
• 4-character alphanumeric display
• Status/Error LED indicator
• Input Format LED indicator
Controls Card edge switches as follows:
• Menu Enter pushbutton switch
• Menu exit pushbutton switch
• Up/down selection toggle switch
Internal Tone Generators Four built-in tone generators, each configurable for 18 discrete
sine wave frequencies ranging from 50 Hz to 16 kHz.
Generator source signal level is equivalent to -20 dBu.
A/D Process HD: 4:4:4
SD: 8:8:8
Resolution: 12-bit A/D and 10-bit video data path
SD Comb Filter: 5-line adaptive
Serial Digital Video Input Data Rates Supported:
SMPTE 292 HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps
SMPTE 259M-C SD-SDI: 270 Mbps
Impedance:
75
Ω
terminating
Equalization (HD):
328 ft (100 m) Belden 1694A